Asus V2-PE3 - Manual (Page 37)

2-21 ASUS Vintage V2-PE3
2.10 Re-connecting cables
You may have disconnected some cables when you were installing
components. You must re-connect these cables before you replace the
chassis cover.
LED cables
Connect the reset button, power switch, power LED, and HDD LED
cables to their respective leads in the system panel connector on the
motherboard. See page 4-12 for the system panel descriptions.
HDD LED
Power LED
Power Switch
Reset button
System Panel Connector
®
F_PANEL
PWR
Ground
GND
Reset
IDE_LED+ IDE_LED-
RESET IDE LED
PWRSW
PWR_LED
+
PWR_LED
-
PWR LED