Asus V2-PE3 - Manual (Page 77)

ASUS Vintage V2-PE3 5-15
First/Second/Third Boot Device
Allows you to assign the boot device priority. Configuration options:
[Floppy] [LS120] [Hard Disk] [CDROM] [ZIP] [USB-FDD] [USB-ZIP]
[USB-CDROM] [LAN] [Disabled]
Boot Other Device [Enabled]
Enables or disables support for other bootable devices. Configuration
options: [Enabled] [Disabled]
Boot Up Floppy Seek [Disabled]
When [Enabled], the BIOS will seek the flopy disk drive to determine
whether the drive has 40 or 80 tracks.
Configuration options: [Disabled] [Enabled]
Boot UP Num-Lock Status [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Security Option [Setup]
Select [Setup] to require the password before entering the BIOS Setup.
Select [System] to require the password before entering the system.
Configuration options: [Setup] [System]
Full Screen LOGO Show [Enabled]
Enable or disable full screen logo show support.Configuration options:
[Enabled] [disabled]