Asus V2-PE3 - Manual (Page 84)

5-22 Chapter 5: BIOS setup
5.8 PC Health Status
The PC Health Status screen shows the motherboard CPU and fan
temperatures, and allows you to set threshold levels for efficient system
operation.
The BIOS auto-detects the former eight items. The user cannot
configure these items.
CPU Temperature [xxxºC]
MB Temperature [xxxºC]
The onboard hardware monitor automatically detects and displays the CPU
and motherboard temperatures.
CPU Fan Speed [xxxxRPM]
System Fan Speed [xxxxRPM]
The onboard hardware monitor automatically detects and displays the
CPU and system fan speed in rotations per minute (RPM). If the fan is not
connected to the motherboard, the field shows 0 RPM.
VCORE Voltage, 3V Voltage, +5V in, +13V in
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
CPU Fan Speed Control [Enabled]
Allows you to enable or disable the CPU fan speed controller.
Configuration options: [Enabled] [Disabled]
Phoenix - Award BIOS CMOS Setup Utility
PC Health Status
Select Menu
Item Specific Help
: Move Enter:Select +/-/PU/PD:Value F10:Save&Exit ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F9: Optimized Defaults
Press <Enter> to enable
or disable.
CPU Temperature 38 o C
MB Temperature 37 o C
CPU Fan Speed 3835 RPM
System Fan Speed 0 RPM
VCORE Voltage 1.50 V
3.3 V voltage 3.34 V
+5V in 5.19 V
+13V in 11.61 V
CPU FAN SPEED CONTROL [Enabled]
Start Up Temperature(ºC) [50]
Full Speed Temperature(ºC) [70]
Start Up PWM [60]
Slope Select PWM/ºC [4 PWM/ºC]