Asus V2-PE3 - Manual (Page 59)

4-9 ASUS Vintage V2-PE3
8. Front panel audio connector (10-1 pin FP_AUDIO)
This connector is for a chassis-mounted front panel audio I/O module
that supports legacy ACʼ97 audio standard.
We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboardʼs high-definition
audio capability.
9. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface
(S/PDIF) port(s). Connect the S/PDIF module cable to this connector,
then install the module to a slot opening at the back of the system
chassis.
The S/PDIF module is purchased separately.
Front Panel Audio Connector
®
BLINE_OUT_L
MIC2
Line out_R Line out_L
BLINE_OUT_R
NC
MICPWR
+5V
A
AGND
FP_AUDIO
Digital Audio Connector
®
+5V SPDIFOUT GN
D
SPDIF_OUT