Alpine CDA-7878R - Manual (Page 21)

19
-EN
4
Press the P. PTY button to activate the
PRIORITY PTY mode again.
• To change the programme category, perform
the step 3.
• To disable the PRIORITY PTY function, press
and hold the P. PTY button for at least 2
seconds.
NOTE
In the PRIORITY PTY function, unlike in the T.INFO
function, the volume does not increase during operation.
5
Press the "F" button to activate the normal mode.
The
indicator will turn off.
NOTE
Operate the unit while the indicator is
illuminated.
If no buttons are pressed within 5 seconds, the
indicator will turn off.
Displaying Radio Text
Text messages from a radio station can be
displayed.
1
Tune in a radio station that transmits text
messages.
2
Press the "F" button. The indicator
illuminates.
3
Press the R.TEXT button to activate the Radio
Text mode. The display shows "WAIT" for a few
seconds, then starts scrolling the text message.
It continues until other operation is performed.
4
To cancel the Radio Text mode, press the
R.TEXT button.
5
Press the "F" button to return to the normal
operation mode. The
indicator
disappears from the display.
NOTES
• If there is no receivable text message or the unit
cannot receive a text message properly, the display
shows "NO TEXT" for 2 seconds.
• Operate the unit while the indicator is
illuminated.
If no buttons are pressed within 5 seconds, the
indicator will turn off.