Alpine CDA-7878R - Manual (Page 36)

34
-EN
Adjusting the Sound Operation
MODE/Audio Control
f UP
g DN
CSD
Customized Sound Database
The unit is equipped with a Customized Sound
Database that creates the most suitable sound for
your car type.
You can fine tune the sound effects by inputting
the size of your front speaker or tweeter, whether
there is a Subwoofer, and the material of your
seats.
1
Press and hold the CSD button for at least 2
seconds.
2
Set your car type
Rotate the Audio Control knob to select your
car type, then press the MODE button.
3
Setting the front speaker
Rotate the Audio Control knob to select the
front speaker type, then press the MODE button.
(DDDrive is an Alpine product)
4
Set the separate tweeter
Rotate the Audio Control knob to select
whether the unit has a separate tweeter or not,
then press the MODE button.
5
Set the subwoofer
Rotate the Audio Control knob to select
whether the unit has a subwoofer or not, then
press the MODE button.
6
Set the material of your seats
Rotate the Audio Control knob to select your
seats’ material, then press the MODE button.
7
Complete the settings
After completing the settings, rotate the Audio
Control knob to select CSD OK, then press the
MODE button.
CSD OK: The unit automatically customizes the
sound effect according to the above
settings.
CSD NO: Returns to “Set your car type” in step 2.
NOTES
• This function is inoperable when DEFEAT is ON
(refer to page 9).
• While making a setting, press and hold the CSD button
for at least 2 seconds to cancel the setting.
• Press the g DN or f UP button to go forward
or backward to the next/preceding step.
→ 10 cm ←→ 13 cm ←→ 16 cm ←
W/O TWEETER
←→ W/ TWEETER
(without separate
tweeter) (with separate
tweeter)
W/O SUB-W
←→ W/ SUB-W
(without Subwoofer) (with Subwoofer)
CLOTH
←→ LEATHER
CSD OK?
←→ CSD NO?