Setting up the pc, Etting, P the – ADC MM701F User Manual
Page 16
Setting Up the PC
10
MM701F User Manual
S
ETTING
U
P THE
PC
To access the modem Web interface, connect your PC to the same LAN IP subnet as the
MM701F. The default LAN IP subnet for the modem is 10.0.0.0 with a subnet mask of
255.255.255.0. In addition, the modem uses 10.0.0.1 as its default LAN IP address.
However, if you have an existing subnet to accommodate the modem, change the IP address of
the modem from the command-line interface as described in
“Setting Up the LAN” on page 48
.
The following is an example of how to set up a PC running Microsoft Windows 98.
1
From the Windows desktop, click
Start
,
Settings
,
Control Panel
to open
the
Control Panel
dialog.
2
From the
Control Panel
dialog, double-click the
Network
icon.
3
From the
Configuration
tab, double-click
TCP/IP
.
If your PC cannot connect to the modem, set your PC Ethernet NIC card for 10 Mbps
half-duplex transmission (not auto-detect).