ADC MM701F User Manual
Page 42
Managing DSL
36
MM701F User Manual
2
View the updated real-time statistics.
ADSL Statistical Parameter
Description
Operational State
Valid entries are:
•
Handshaking—the transceiver is exchanging or
attempting to exchange information necessary to start
up.
•
Training—the transceiver is in the process of starting
up.
•
Show Time—the transceiver has started up, trained,
and is capable of passing user data.
Coding Gain (dB)
Coding gain is the expected improvement or gain due to
trellis/RS coding. It is used to help determine the
downstream connection rate. The larger this value is, the
higher the connection rate will be.
DSP Version
The modem DSP code can be upgraded—this is the
current version that is running on your system.
Last Failed
Shows the last state reached before start-up failed. This is
used for troubleshooting by technicians.
Local Attenuation (dB
Current power attenuation at the modem.
Remote Attenuation (dB)
Current remote power attenuation.
Local SNR Margin (dB)
Current Signal to Noise (SNA) ratio.
Local Tx Power (dB)
Current transmit power attenuation at the modem.
Remote Tx Power (dB)
Current remote transmit power attenuation.
RS Frame Count
Reed Solomon frame count of forward error corrections on
the DSL line.
Downstream Data Rate
Actual downstream data bit rate after ATM headers have
been removed.
Upstream Data Rate
Actual upstream data bit rate after ATM headers have been
removed.
Total Failure Count
Total count of errors including CRC, loss of signal, and
framing errors.