ADC MM701F - Manual (Page 7)

MM701F User Manual 1
1
O
VERVIEW
The MM701F is a versatile, high speed
modem that connects your LAN to one or
more service providers. It employs ADSL
technology for asymmetric rates up to 7.552
Mbps over single-pair wiring and allows for
multiple management options, including an
easy to use Web-based interface. In addition,
the MM701F supports 32 simultaneous Bridge/Router or PPP sessions to the same or different
service providers over its ADSL WAN interface. For sizeable deployment, the MM701F
provides the ability to download pre-defined configuration files to the flash memory instead of
manually defining each and every value for all modems.
The MM701F also includes several useful protocols and services. If you require IP addresses to
be served dynamically on your LAN, use the built-in DHCP server. If you need to update your
modem software, use the built-in TFTP client. If you require private IP addresses and need to
translate them into public IP addresses, use the built-in NAT function. If you need to exchange
IP routing information with another device, configure and implement RIP. For a complete list
of features, see
Appendix A .
Use this guide to install and configure your MM701F. Before installation, verify your shipping
package contents and system requirements as described in the sections listed below.
Section Page
Verify Shipping Package Contents 2
System Requirements 2
What To Do Next 2
MAR
Status LEDs
PWR RX TX SYNC COL RX TX LINK
LAN DSL