ADC MM701F - Manual (Page 28)

Managing the System
22 MM701F User Manual
Set to Factory Defaults
When you configure the MM701F, you change the factory default settings to new values. You
can return these parameters to their default values to provide a known starting point if you are
troubleshooting or you simply want to configure new parameters. For session default values, see
“Default Session Parameter Values” on page 70 .
1 Click System on the menu bar then Factory Defaults to access the System Factory Defaults page.
2 Click Proceed if you want to return all values to their original factory values.
3 Click Cancel if you do not want to return all values to their original factory values.
Active links are lost when you reset to factory default values.