Ascaso Factory Electrical Fryer - Manual (Page 11)

(FIG 1)
5
Oil replacement
It is recommended that oil replacement must be made with cold oil to
avoid burning risk.
4 5
8-10l models
Put a container under emptiness
tap. Push down and at the same
time turn the tap handle on in
the direction indicated by the
arrow on the symbol marked
down.
Empty the tank and clean all
solid residues that may have
been accumulated on it. Push
down and at the same time turn
the tap handle off in the direction
indicated by the arrow on the
symbol .
Fill the tank with new oil.
O
__
6l model
With the fryer disconnected from
the mains and oil being cold,
disassemble the head by
unscrewing the handle on the
lower part of it. Once this is
removed from the tank, pull the
tank up from its location and
remove it.
Remove the oil from the tank.
Reassemble the tank and the
head.
Fill the tank with new oil.
Cleaning and maintenance
For carrying out the cleaning of
the fryer first disconnected the
machine from the mains in all
cases.
If cleaning of the internal part of
the tank is not desired, use a
moistened piece of cloth on all
surfaces of the fryer. It must
never become wet nor immersed
in water for its cleaning.
The resistance may be cleaned
with a brush moistened with
water and soap, with the
precaution of avoiding the head
to become wet, and it will be
carefully dried. Neither sharp nor
pointed tools must be used for
its cleaning.
For cleaning the tank
disassemble the head by
unscrewing the handle on the
lower part of it. Once this has
been carried out, empty it of oil
(see item no. 4).
Clean the tank with hot water
and soap, rinse it with abundant
water and dry it with a dry piece
of cloth, reassembling the head.
(FIG 1)
(FIG 2)