ACTiSYS VER. 061030 CAM-6500 - Manual (Page 14)

9
14 Pelco P 9600
Select protocol: Pelco D, with switch no. 01 and baud rate 2400,
for instance, the ID switch should be set as below:
decimal single digit
5. 16 Pin Connector for LAN/WAN
The LAN/WAN cable (shown as the figure below) is shipped
with IP high speed dome. Please find it in the accessory bag.
6. 22 Pin Connector
A 50cm data cable (shown as the figure below) is shipped with IP
high speed dome. Please find it in the accessory bag.
Power Input
PIN NAME DESCRIPTION
1 AC24V AC 24V of Power Input
2 E-GND E-Ground Pin of Power Input
3 AC24V AC 24V of Power Input