ACTiSYS VER. 061030 CAM-6500 - Manual (Page 61)

56
♦ ALARM ACTION
Select one of these modes that choose a kind of actions that should be
executed when an alarm is triggered. The alarm actions can be set to execute
the preset position, sequence, auto-pan or cruise function.
♦ PRESET
Select a preset point where the dome should go when an alarm pin is
triggered.
SEQUENCE
Select a sequence line that the speed dome camer should execute when alarm
pin is triggered. The Sequence line should be defined prior in SEQENCE
setup menu.
AUTOPAN
Select an auto-pan line that the dome camera should execute when alarm pin
is triggered. The Auto-pan line can be defined in setup AUTOPAN menu.
CRUISE
Select a cruise line that the speed dome camera should execute when alarm
pin is triggered. The Cruise line can be defined in CRUISE setup menu.
♦ DWELL TIME
The DWELL TIME is the duration of executing ALARM ACTION: Preset
or Sequence. When alarm takes place, the dome will go to the preset position
or execute sequence function and stay at each sequence point for a period of
time (1~127 seconds). If select <Always>, the dome will go to the preset
position and stay there until alarm condition is released or users rotate the
dome.
♦ EXIT
Exit the ALARM SETTING menu.
B-3-13 HOME SETTING
Users are able to set an operation mode to ensure constant monitoring; if the dome
idles for a period of time, the pre-set function will be activated automatically, this
NOTE: The DWELL TIME is only accessible when selecting
ALARM ACTION: Preset or Sequence.