ACTiSYS VER. 061030 CAM-6500 - Manual (Page 68)

63
♦ ON
Select the item to remove the IR cut filter.
¾ 23x MODEL
♦ AUTO
The internal circuit will automatically decide the occasion to remove the IR
cut filter according to the image brightness level.
THRESHOLD
The speed dome will remove the filter immediately when the threshold value
is reached. The threshold options are <LOW>, <MID> and <HI>. <LOW>
threshold indicates a higher sensitivity and can improve the reliability of lens.
IR COLOUR
When IR function is enabled, the video output can be programmed as colour
or B/W.
♦ ON
Select the item to remove the IR cut filter.
B-3-18 ALARM DETECT (18x MODEL Only)
This function instructs the camera to detect movement within the monitoring area
and then send an alarm signal automatically. To activate this function, alarm
connection setups most be completed in advance.
♦ DETECT SWITCH
The item is used to enable or disable the ALARM DETECTION function.
ALARM DETECT
DETECT SWITCH OFF
DETECT MODE INT. FOCUS
EXIT YES
IR FUNCTION
THRESHOLD LOW
IR COLOR COLOR
EXIT YES