ACTiSYS VER. 061030 CAM-6500 - Manual (Page 49)

44
B-3-3 FOCUS
Automatically adjusts the focus position to maximize the high frequency content
of the picture in a center measurement area, taking into consideration the high
luminance and strong contrast components. The focus of the dome camera can be
operated in two modes: Manual Focus mode and Auto Focus mode. Different
settings for various models are described as follows.
¾ 18x MODEL
♦ AUTO
The optimum focus is achieved by the internal digital circuit. There are 3
modes for users to select for different conditions.
Normal AF (Auto Focus) Mode: The dome will automatically adjust the
focus of the picture.
Zoom Trigger Mode: When the zoom ratio is changed, the dome will
automatically adjust focus again after a period of time (the preset value is
initially set for five seconds).
Interval AF Mode: The mode is used for AF movements carried out at
particular intervals. If users pan/tilt the dome, the dome will focus
automatically after a period of time. The initial value is five seconds.
♦ MANUAL
In this focus mode, users can adjust the lens focus manually.
¾ 22x MODEL / 23x MODEL
♦ AUTO
The optimum focus is achieved by the internal digital circuit. Users can
adjust the minimum auto focus range for some special conditions; the options
are <1cm>, <10cm>, <30cm> and <1m>.
♦ MANUAL
In this focus mode, users can adjust the lens focus manually.
FOCUS LENGTH
TURNING VALUE 10CM
EXIT YES