HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 168)

Configuring the Virtual Connect domain using the CLI 168
login as: <RADIUS user>
password: <password>
• TACACS+ Authentication
>ssh 192.168.0.120
login as: <TACACS+ user>
password: <password>
• Mechanism-based Authentication
>ssh 192.168.0.120
login as: <auth-mechanism>:<username>
password: <password>
Valid values for auth-mechanism are local, ldap, radius, and tacacs.
For example:
>ssh 192.168.0.120
login as: tacacs:<TACACS+ user>
password: <password>
• Role-based Authentication
>ssh 192.168.0.120
login as: <role>:<username>
password: <password>
Valid values for role are domain, network, server, and storage.
For example:
>ssh 192.168.0.120
login as: network:<username>
password: <password>
In role-based authentication, the role authentication order configured for the specified "role" will be
used.
Domain setup
After logging in to the CLI (on page 167 ), perform the following tasks to set up the domain:
1. Import the enclosure (" Importing an enclosure " on page 169 ).
2. Name the domain (" Setting the domain name " on page 169 ).
3. Configure local user authentication settings (" Configuring local users " on page 170 ).
4. Set up local user accounts and privileges (" Configuring local users " on page 170 ).
5. Set up authentication support for users:
o LDAP authentication (" Configuring LDAP authentication support for users " on page 169 )
o RADIUS authentication (" Configuring RADIUS authentication support for users " on page 169 )
o TACACS+ authentication (" Configuring TACACS+ authentication support for users " on page 170 )
6. Set up role-based authentication (" Configuring role-based authentication settings " on page 170 ).
7. Set up the LACP timer (" Configuring the LACP Timer " on page 172 ).
8. Obtain and use a new signed certificate (" Obtaining and using a new signed certificate " on page
172 ).