HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 80)

Command line 80
Item Description
value is "Short".
Labels (optional) Labels assigned to this network. Labels are used in the GUI to help manage large
numbers of networks. Labels can be assigned in the CLI, but are only used in the GUI.
A maximum of 16 labels can be assigned.
Color (optional) Color assigned to this network. Color is used in the GUI to help manage large numbers
of networks. A color can be assigned in the CLI, but is only used in the GUI. Red, green,
blue, purple, or orange are allowed.
Examples
->add network MyNewNetwork
Creates a new network, and then adds it to the domain as a member of the Default
network access group
->add network Network1 nags=DatabaseNetGroup,AccessNetGroup
Creates a network named Network1 and assigns it to network access groups
DatabaseNetGroup and AccessNetGroup
->add network MyNewNetwork2 UplinkSet=MyUplinkSet VLanID=145
Creates a new network and uses a shared uplink port set
->add network FcoeNetwork -fcoe UplinkSet=MyUplinkSet
VLanID=100
Creates a new FCoE network
->add network Network1 Private=Enabled
Configures a private network when adding a new network
->add network Network1 UplinkSet=Uplinkset1 VLANID=100
NativeVLAN=Enabled
Creates a new network with a shared uplinkset and tags it as Native VLAN
->add network Network1 ConnectionMode=Failover
Creates a new network and sets the connection mode as failover
->add network Network1 VLanTunnel=Enabled
Creates a new network and enables VLAN tunneling
->add network Network1 PrefSpeedType=Custom PrefSpeed=4000
MaxSpeedType=Custom MaxSpeed=6000
Creates a new network with a preferred connection speed of 4Gb and a maximum
connection speed of 6Gb
->add network Network1 ConnectionMode=Auto
LacpTimer=Domain-Default
Creates a new network using the domain default LACP timer
->add network Network1 Labels="label1, label2"
Creates a new network with labels label1 and label2
->add network Network1 Color=red
Creates a new network with the color red
Item Description
remove network Remove a network from the domain. To remove a network, it cannot be in use by any
server profiles.
Syntax
remove network <NetworkName|*>
Parameter
NetworkName
(required)
The name of an existing network in the domain. Use "*" to remove all networks.
Examples
->remove network MyNetwork
Removes a specified network
->remove network *
Removes all networks