HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 77)

Command line 77
Item Description
->add network-range UplinkSet=Alpha
NamePrefix=Network NameSuffix=_A VLANIDs=1-100
Creates 100 networks in an existing uplink set
->add network-range UplinkSet=Alpha
NamePrefix=Network NameSuffix=_A
VLANIDs=101-110,115-119,130,4094,700-703
Creates non-contiguous networks in an existing uplink set
Item Description
remove network-range Remove multiple networks from a shared uplink set.
Syntax
remove network-range [-quiet]
UplinkSet=<UplinkSetName> VLANIds=<VLAN range list>
Options
quiet Suppresses user confirmation prompts during network range removal. This
option is used mainly in automated scripting scenarios.
Properties
UplinkSet (required) The name of the shared uplink set from which the networks are being
removed
VLANIds (required) The list of VLAN IDs (comma separated list of VLAN ID ranges) to be
deleted from the shared uplink set. For this command, the shared uplink
set and list of VLAN IDs identify the networks to be deleted, not the
network names.
Example
->remove network-range UplinkSet=Alpha
VLANIDs=1-10,15,21-30
Removes networks from an existing uplink set
Item Description
set network-range Change the configuration of multiple networks in a shared uplink set.
Syntax
set network-range [-quiet] UplinkSet=<UplinkSetName>
VLANIds=<VLAN range
list> [State=<enabled|disabled>]
[PrefSpeedType=<auto|custom>] [PrefSpeed=<100Mb-20Gb
in 100Mb steps>] [MaxSpeedType=<unrestricted|custom>]
[MaxSpeed=<100Mb-20Gb in 100Mb steps>]
[Nags=<Name1>[<Name2>,...]
[SmartLink=<enabled|disabled>]
[Labels=<Label1>[<Label2>,...]
[Color=<red|green|blue|orange|purple>]
Options
quiet This option suppresses user confirmation prompts and is useful when
scripting operations.
Properties
UplinkSet (required) The name of an existing shared uplink port set to use with the networks
VLANIds (required) A comma separated list of VLAN ranges that identify the networks in the
shared uplink port set being modified
State (optional) Enables or disables the networks. Valid values are "Enabled" and
"Disabled". The default value is "Enabled".
PrefSpeedType (optional) The default connection speed for any Ethernet connection attached to
these networks. Valid values include "Auto" and "Custom". "Custom"
enables you to configure the preferred speed. The default value is "Auto".