HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 50)

Command line 50
IMPORTANT: Users with server role permissions cannot modify IGMP settings when the VC
domain is under VCEM control.
Manage Ethernet IGMP Snooping settings.
Supported actions: help, set, show
Item Description
set igmp Modify Ethernet IGMP Snooping settings.
Syntax
set igmp [Enabled=<true|false>] [Timeout=<interval>]
[NoFlood=<true|false>]
Properties
Enabled
(optional)
Enables or disables IGMP Snooping. Valid values are "true" and "false".
Timeout
(optional)
The idle timeout interval (in seconds) for IGMP Snooping. Valid values include integers
from 1-3600. The default IGMP idle timeout is 260 seconds.
NoFlood
(optional)
Allow or prevent the flooding of unregistered multicast packets. Valid values are "true"
and "false". This parameter can be "true" only when IGMP Snooping is enabled,
otherwise flooding always occurs.
Examples
->set igmp Enabled=true
Enables IGMP Snooping
->set igmp Enabled=true Timeout=30
Enables IGMP Snooping and sets the idle timeout
->set igmp Enabled=true NoFlood=true
Enables IGMP snooping and prevents the flooding of unregistered multicast packets
Item Description
show igmp Display Ethernet IGMP Snooping settings.
Syntax
show igmp
Example
->show igmp
Displays IGMP Snooping settings
interconnect-mac-table
Display interconnect module MAC table information.
Supported actions: help, show
Item Description
show interconnect-
mac-table
Display interconnect module MAC table information for the specified module.
Syntax
show interconnect-mac-table <ModuleID> [FilterBy]
Parameter
ModuleID (required) The ID of the module for which to display the MAC table. The ID is in the format
of <EnclosureID>:<BayNumber>.
Option
FilterBy (optional) The MAC table output can be filtered by property. The output filter syntax used is
Property=Value.
Examples