HP StorageWorks XP Remote Web Console Software - Manual (Page 151)

• WWN settings allow you to add, delete or change the WWN information. See “ Setting the WWN
Information ” on page 157.
• LU path settings allow you to add, delete, or change LU paths. See “ Setting the LU
Path ” on page 157.
• Command Device settings and set or release the command device and command device security.
See “
Configuring the Command Devices ” on page 158.
Column Format
The LUN Manager spreadsheet allows you to write the settings for CHA mode, port, host group,
WWN, path definition, and command devices. The format of the LUN Manager spreadsheet is as
follows:
• 1st column to 6th column: Current settings area
• 7th column to 10th column: Blank columns
• 11th column to 16th column: New settings area
The number of columns used depends on the function tag. If a particular function tag requires less
than six columns, the unused columns are left blank.
Table 18 describes the format of the LUN Manager spreadsheet.
Table 18 LUN Manager Spreadsheet Format
Function Tag
Column
[LDEV] [LUN] [WWN] [HostGroup] [Port] [CHA]
CU Port Port Port Port CHA 1st
LDEV Group ID Group ID Group ID Security Switch PCB Mode 2nd
Command
Device
LUN WWN Name AL-PA Blank 3rd
Command
Device Security
CU Name Host mode Fabric Blank 4th
Blank LDEV Blank
Host mode op-
tion
Connection Blank 5th
Blank Blank Blank Channel speed Blank 6th
Blank 7th
Blank 8th
Blank 9th
Blank 10th
CU Port Port Port Port CHA 11th
LDEV Group ID Group ID Group ID Security Switch PCB Mode 12th
Command
Device
LUN WWN Name AL-PA Blank 13th
XP Remote Web Console User Guide 151