HP StorageWorks XP Remote Web Console Software - Manual (Page 33)

Using the XP Remote Web Console
XP Remote Web Console Conventions
• If you specify different settings for the values on most of the XP Remote Web Console panels, the
text color of the values changes to blue or the icon changes; however, the new settings will not
take effect until you click Apply.
Table 6 describes the text colors and font types displayed on the
XP Remote Web Console panels.
• You can create and store up to 1,000 settings or operations before actually applying them to the
array. To avoid a possible error, do not apply more than 1,000 settings at a time.
• The layout of an XP Remote Web Console panel is reset when you click Apply, Cancel, Refresh
(
), All Refresh ( ), or when you switch tabs. Clicking All Refresh ( ) also updates the inform-
ation on the SVP and the host.
IMPORTANT:
Whenever an update is in process, other users will be locked out of the XP Remote Web Console
panels and maintenance and SVP operations. Because the update can take some time, you should
not use the All Refresh button unless you need to recover from an error.
• If you see a difference between the configuration information displayed in XP Remote Web Console
and the actual configuration information that is recognized from the host, the configuration inform-
ation displayed on the XP Remote Web Console may be updated by selecting All Refresh (
).
• When the microcode is being updated on the SVP, you must exit and restart all web browsers on
the XP Remote Web Console.
• If an XP Remote Web Console user is in Modify mode and applying settings, you will not be able
to log on to XP Remote Web Console until after those settings have been applied. A wait of longer
than five minutes indicates an abnormal end, in which case you need to exit and restart the
browser.
• When an internal process is being executed on the SVP (for example, a configuration change,
option check, or an operational information acquisition), XP Remote Web Console processing
might be temporarily delayed.
• If you reset the time of the clock on XP Remote Web Console, clear the existing temporary Internet
files of your web browser before logging on to the XP Remote Web Console.
• When the XP Business Copy Software or ShadowImage for z/OS quick-restore operation is being
performed, an XP Remote Web Console panel may display old information (status before the quick
restore operation) on logical volume (LDEV) configurations. In this case, wait until the quick restore
operation completes, and then click Refresh (
) or All Refresh ( ) to update the XP Remote Web
Console panel.
IMPORTANT:
Whenever an update is in process, other users will be locked out of the XP Remote Web Console
panels and maintenance and SVP operations. Because the update can take some time, you should
not use the All Refresh button unless you need to recover from an error.
• If you request a change to the array's configuration while another change is being made, an error
message is displayed.
XP Remote Web Console User Guide 33