HP StorageWorks XP Remote Web Console Software - Manual (Page 63)

1. Log on to the SVP to open the XP Remote Web Console main panel (see Figure 46 ).
2. Change to Modify mode.
3.
Click Install ( ) on the XP Remote Web Console main panel. The License Key tab is the default
view.
4. Select the desired option that you want to uninstall in the list.
5. From Mode, click the Key Code radio button.
6. Click Uninstall. A confirmation message appears.
7. Click OK. The row of the selected option changes to blue bold italics and also changes the
displayed status to Install.
IMPORTANT:
To implement the setting, you must click Apply.
To disable another option, repeat Step 4 through Step 7 .
8. Click Apply.
9. Click OK. The status of the uninstalled option changes from Installed to Not Installed.
CAUTION:
On rare occasions, a product option that is displayed as Not Installed but still has available
licensed capacity (shown as XX TB) might remain in the list. In this case, select that option,
and click Uninstall to refresh the status of that product option.
Caution for XP LUN Security Extension Software: When you uninstall XP LUN Security Extension
Software, an error might occur even if the Permitted Volumes column of the License Key panel indicates
that the licensed capacity is 0 TB (zero terabytes). To remove the error and continue uninstallation,
follow these steps:
1. Open the XP LUN Security Extension Software panel, and then find logical volumes that are
unusable as S-VOLs (secondary volumes).
2. Change the settings of the logical volumes so that the logical volumes are usable as S-VOLs.
3. Return to the License Key panel and then uninstall XP LUN Security Extension Software.
Allocating Licensed Capacity among Storage Logical Partitions
Overview of Storage Logical Partitions
When storage partition administrators want to use the XP Remote Web Console product options for
their own SLPRs, the licensed capacity for each option has to be partitioned and allocated to each
SLPR. When you want to allocate the license to SLPRs for product options that are not charged by the
amount of available capacity (for example, XP Remote Web Console) or when you have purchased
the unlimited license for the options charged by the amount of available capacity, you need to set
the options for each SLPR to Enable or Disable.
Only storage administrators can partition and allocate licensed capacity.
XP Remote Web Console User Guide 63