HP StorageWorks XP Remote Web Console Software - Manual (Page 137)

Figure 97 Add Community Pop-Up Menu
.
Figure 98 Add Community Pane
.
Deleting a Community Name
To delete a community name:
1. Change to Modify mode.
2.
Click Install ( ).
3. Click the SNMP IP Security tab.
4. In the Community & Trap box, select and then right-click the unwanted community. The Delete
Community popup menu is displayed (see
Figure 99 ).
5. Select the Delete Community command. A confirmation message is displayed.
6. Click OK to delete, or click Cancel to cancel the operation. The selected community is deleted
from Community & Trap, but the setting is not yet implemented in the array.
7. To apply the changes to the array, click Apply. Click OK.
XP Remote Web Console User Guide 137