HP StorageWorks XP Remote Web Console Software - Manual (Page 168)

• The setting range is incorrect. The correct ranges are as follows:
CU: 00 - 3F
LDEV: 00 - FF
LUN: 0000 - 03FF
Group ID: 00 - FE
Host Mode: 00 - 2F
• Level 2 check:
The current settings are compared to the imported settings and checked for logical consistency.
Note that certain errors can only be detected by the third check.
When you import a spreadsheet with no errors detected, the panel displays Ready above the error
information list, and the Apply button becomes available.
Figure 120 Second Error Check Flow Chart
.
Third Error Check
The third check is performed after you click Apply. Errors detected at this third check include the
following:
• There is no difference between the current configuration definition and the configuration definition
on the imported spreadsheet. The spreadsheet is accepted, but no operation will be performed.
• You are trying to delete a LUN that is needed to process input/output (I/Os).
The errors caused by other factors are detected by the second check as the logical errors of the
settings. However, there could be an instance where the current settings are changed even though
you are in Modify mode. In this case, an error occurs during the third check.
Configuration File Loader 168