HP StorageWorks XP Remote Web Console Software - Manual (Page 80)

NOTE:
If you select External Device Only in the Device Type drop-down list, the On-Demand capacity
field is not displayed.
• Allocated Mainframe LDEVs: Displays the number of zSeries, S/390 and multiplatform volumes
that have assigned paths.
NOTE:
This does not include XP Auto LUN Software reserved volumes.
• Reserved Mainframe LDEVs: Displays the number of zSeries, S/390 and multiplatform volumes
that are XP Auto LUN Software reserved volumes.
• V-VOL: Displays the number of V-VOLs that are virtual volumes (LDEVs that do not consume the
actual disk capacity). V-VOLs are currently used for XP Snapshot Software. For more information,
see the HP StorageWorks XP Snapshot User Guide: HP XP12000 Disk Array, HP XP10000 Disk
Array, HP 200 Storage Virtualization System.
• Total (All LDEVs): Displays the total of all of the above volume types.
• Apply: Implements all of the changes or settings made on the XP Remote Web Console main
panel.
• Cancel: Cancels the changes or settings made on the XP Remote Web Console main panel.
NOTE:
If you input any changes, the text may change to blue bold italics or an icon may change. The changes
are not actually implemented until you click Apply.
System Tab on the XP Remote Web Console Main Pane
The System panel (see Figure 52 ) displays the equipment information and the port information for the
connected array. This panel is not available to storage partition administrators.
Performing XP Remote Web Console Operations 80