HP StorageWorks XP Remote Web Console Software - Manual (Page 140)

shows the amount of time that has been needed from step 1 to the completion of the
creating pair operation.
•
Used Volume: Indicates the size of used volumes, and also indicates the licensed capacity.
For example, if 12.34 (15.0) (TB) is displayed, the licensed capacity for URz is 15.0 terabytes,
and 12.34 terabytes of volumes are used.
NOTE: If the licensed capacity is unlimited, the sized of used volume is not displayed.
•
Total Pairs: Indicates the current total number of data volume pairs.
•
Preview: Displays detailed information about operations that will occur when you click Apply.
List: Displays changes that have been made in the window. When you change settings
in the window, the changes will be displayed in the Preview list before the changes are ◦
applied to storage systems. If you are sure that information in the Preview is correct, select
the Apply button to apply the settings that you have made.
NOTE: When the Preview list displays changes that have been made, you can only
perform the same type of operation that you have been doing and cannot perform most
of other operations (you can only view detailed information about pairs even when the
Preview list displays changes). For example, if you are trying to release pairs and the
Preview list is displaying the pairs that you want to release, you are unable to perform
any other operations; for example, you are unable to split pairs and restore pairs.
◦ Operation: Indicates the operation that will occur when you select Apply.
Create pairs Add Pair
Split pairs Suspend Pair
Restore pairs Resume Pair
Release pairs Delete Pair
Change pair option(s) Change Pair Option
Nothing will occur when you click Apply Blank
◦ Preview: The number to the left of the slash (/) indicates the number of items displayed
in the Preview list.
The number to the right of the slash indicates the maximum number of items that can be
displayed in the Preview list.
For example, if Preview 010/1096 is displayed, you can add another 4,086 items to
the Preview list.
•
Apply: Applies settings in the Preview list to the storage systems.
•
Cancel: Cancels settings in the Preview list.
Information on the Pair Operation window will be updated when you do one of the following
information:
1. Select another tab and then reselect the Pair Operation tab.
2. Click File, Refresh on the menu bar of the XP Remote Web Console main window.
3. Select the Apply button.
4. Select modify mode when you are in view mode.
5. Update the Display Filter window.
6. Click the Previous button or the Next button.
140 Performing URz Pair Operations