HP StorageWorks XP Remote Web Console Software User Manual
Page 164
When the updating process is in progress, the checking process automatically continues until
the updating process finishes. The updating process is checked at ten-second intervals.
•
Last Update: Displays the date and time when operation history was last updated.
•
Export: Saves operation history in a CSV file. For detailed information, see
NOTE:
You cannot save the history file while operation history is being updated. Please
save operation history in a text file after operation history is updated.
•
The list displays history of operations on data volume pairs in the connected storage system.
The list consists of the following columns:
◦
Operation Date/Time: The date and time when the operation was completed.
◦
Operation: The operations are:
Pair definition: A data volume pair was defined.
Add Pair Start: Creation of the data volume pair was started.
Add Pair Complete: Creation of the data volume pair was finished.
Resume Pair Start: Restoring of the data volume pair was started.
Resume Pair Complete: Restoring of the data volume pair was finished.
Suspend Pair Start: Splitting (Suspending) of the data volume pair was started.
Suspend Pair Complete: Splitting (Suspending) of the data volume pair was finished.
Suspend Pair(Failure): The data volume pair was split (suspended) because of a failure.
Delete Pair Start: Release of the data volume pair was started.
Delete Pair Complete: Release of the data volume pair was finished.
Status Change by MCU(Simplex to Pending): The status of the data volume pair was
changed from Simplex to Pending because of an operation from the primary storage
system.
Status Change by MCU(Simplex to Duplex): The status of the data volume pair was changed
from Simplex to Duplex because of an operation from the primary storage system.
Status Change by MCU(Pending to Duplex): The status of the data volume pair was changed
from Pending to Duplex because of an operation from the primary storage system.
Status Change by MCU(Pending to Suspend): The status of the data volume pair was
changed from Pending to Suspend because of an operation from the primary storage
system.
Status Change by MCU(Duplex to Suspend): The status of the data volume pair was
changed from Duplex to Suspend because of an operation from the primary storage
system.
Status Change by MCU(Duplex to Simplex): The status of the data volume pair was changed
from Duplex to Simplex because of an operation from the primary storage system.
Status Change by MCU(Pending to Simplex): The status of the data volume pair was
changed from Pending to Simplex because of an operation from the primary storage
system.
Status Change by MCU(Suspend to Simplex): The status of the data volume pair was
changed from Suspend to Simplex because of an operation from the primary storage
system.
Status Change by MCU(Suspend to Pending): The status of the data volume pair was
changed from Suspend to Pending because of an operation from the primary storage
system.
164 Viewing History of Data Volume Pair Operations