HP XP P9500 Storage - Manual (Page 256)

Displayed item
Description No
summary
displayed
Summary
displayed
This number combined with the storage system
name (shown in DskName) identifies the LU that
is accessed by a path.
For the Lightning 9900 series, Lightning 9900V
series, Hitachi Universal Storage Platform 100,
Hitachi Universal Storage Platform 600, Hitachi
Universal Storage Platform1100,HUS VM, and
Hitachi NSC55, the first two characters of iLU
are the CU (Control Unit) number, and the last
two characters are the internal LU number
within the CU. Indicated by a hexadecimal
number. For the XP10000/XP12000, P9500, and
SVS, the first three characters of iLU are the CU
(Control Unit) number, and the last two
characters are the internal LU number within the
CU. The first character of a CU number is 0. For
the Thunder 9500V series, Hitachi AMS2000/
AMS/WMS/SMS series, and HUS100 series, the
entire value of iLU is the internal LU number
within the storage system. You can identify an
actual LU by referencing iLU from the storage
system management program. For Universal
Storage Platform V/VM series, and Hitachi
Virtual Storage Platform, iLU is indicated by a
hexadecimal number. The first two characters of
iLU are the number of the logical DKC (Disk
Controller), the middle two numbers are the CU
(Control Unit) number, and the last two
characters are the internal LU number within the
CU.
• For the EMC DMX series, EMC CX series, and HP
EVA series:
The ID that differs from the LU number in the
storage system and that identifies the LU is
indicated by a hexadecimal number. The value
of iLU consists of 32 digits. The first 13 digits of
iLU are displayed, and the rest of the digits are
displayed as an ellipsis (...).
SLPR
#1
SLPR
#2 The number of the SLPR to which an LU belongs,
indicated by a number from 0 to 31. A hyphen (-) is
displayed if the storage logical partition functionality
for the storage system for the target LU is not
supported.
HDevName
#1#
3
- Host device name.
A drive letter is displayed. If no drive letter has been
assigned, a hyphen (-) is displayed.
The drive letter is displayed in the HDevName field
even if the value of the DNum field is 0. Note,
6-66
Command Reference
Hitachi Dynamic Link Manager User Guide for Windows ®