HP XP P9500 Storage - Manual (Page 318)

Message ID Message Text Explanation
KAPL01155-W The dynamic I/O path control
function is already set to aa...aa
for storage.
Details
aa...aa: "on" or "off"
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the setting for storage. For
details on the view operation, see
view (Displays Information) on
page 6-32 .
KAPL01156-I The dynamic I/O path control
function was set to aa...aa for
storage.
Details
aa...aa: "on" or "off"
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the setting for storage and
LUs. For details on the view
operation, see view (Displays
Information) on page 6-32 .
KAPL01157-I The dynamic I/O path control
function was set to aa...aa for
the system.
Details
aa...aa: "on" or "off"
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the setting for the host,
storage, and LUs. For details on
the view operation, see view
(Displays Information) on page
6-32 .
KAPL01158-E Dynamic I/O path control cannot
be applied to the specified
storage.
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the path ID. For details on
the view operation, see view
(Displays Information) on page
6-32 .
KAPL01160-W The path configuration was not
changed.
Details
This message indicates that no
paths were deleted.
Action
¢
Check whether the paths to
be deleted have been
disconnected from the
system.
¢
Check whether the paths to
be deleted are in the
Offline(C) status.
¢
Use the view operation of the
HDLM command (dlnkmgr) to
check whether the paths have
8-26
Messages
Hitachi Dynamic Link Manager User Guide for Windows ®