AMX MAX-CSE - Manual (Page 47)

MAX-CSD10 Web Interface
41 MAX-CSE/MAX-CSD10 Operation/Reference Guide
Communicating With The Unit Via the Browser-based UI
To facilitate communicate with the MAX-CSD10, it is necessary for the unit to first obtain a DHCP
Address (page 49). Once that address is known, you can then use your web browser to access the
browser-based User Interface (UI) pages and then configure the project, video, and IP connection
parameters.
1. Launch your web browser.
2. Enter the IP Address of the target unit (example: http://192.199.99.99) into the web browser’s
Address field.
3. Press the Enter key on your keyboard to initiate communication and launch the initial on-screen
Enter Network Password security dialog.
4. The MAX unit is shipped in a secured configuration which requires the user to enter a username and
password into the on-screen security dialog before gaining access to the UI pages.
5. Enter the words administrator and password into their corresponding case-sensitive User Name/
Password fields. This profile can later be changed.
6. Click OK to enter the information and proceed to the first UI page.
Administration Page
The Administration Page (FIG. 22) is the default page upon opening the Decoder Manager. From here,
the user may reach any of the other Decoder Manager pages or check or update the existing device
firmware.
Updating Firmware
To update the current firmware being used by the MAX-CSD10:
1. Click the Update Firmware button on the Administration Page.
2. A new window will open to warn you that you must reboot the device before uploading any
firmware file (see FIG. 15 on page 25).
3. If you have not previously rebooted the device, click the Reboot button. After it reboots, either
return to or refresh the Administration Page.
4. If you already rebooted the device, click the Reboot Done. Upload a File. button. This closes the
warning window and enables the Browse and Submit buttons next to the Upload Firmware field.
5. Enter the directory path in the Upload Firmware field or click the Browse button to locate the file.
When the file is selected, click the Submit button to upload the file to the device.
Administration Page Features
Resources This entry lists the latest version of the decoder firmware
uploaded to the device.
Update Firmware This button allows the user to upload new firmware updates to
the device.
If any Ethernet connectivity issues happen while uploading the firmware, the firmware
may not be installed completely. Please reboot the device and then attempt to reload
the firmware should you have any problems with connectivity.