HP TopTools - Manual (Page 65)

HP Toptools for Unicenter User Guide
Figure 5-31. Each HP hub has a custom icon and new menu items.
Following installation, new menu items are enabled. Right clicking on an HP hub icon displays the menu shown in
Figure 5-32.
Figure 5-32. The HP Toptools menu actions for AdvanceStack and ProCurve devices.
The degree of manageability depends on the capabilities of the particular HP device.
HP Toptools Properties opens a browser to the Toptools server and displays the Toptools property page for the
device as shown in Figure 5-33.
Properties(Device View) provides a visual representation of the configuration and status of networking devices that
do not support webagents. This feature is supported with single system installations only.
Node Port Table provides a list of the ports on the device, their type and the subnets or devices to which they are
connected. A sample Node port table that can be displayed using the HP Toptools Node Port Table Action is shown
in Figure 5-34.
SNMP/Trap Configuration allows the administrator to set the trap Thresholds, Trap Receivers, SNMP Community
Names and Authorized Managers for the device. This feature is supported with single system installations only.
Update Firmware allows you to select and install updated firmware for the device.
HP Toptools Home Page opens a browser window to the Toptools server.
Management Home Page launches the web page for web-enabled devices.
Page 65