HP XP P9000 Command View Advanced Edition Software - Manual (Page 271)

• Adding or deleting storage systems
• Adding or deleting hosts
• Adding or deleting copy pairs using the CLI
For storage controlled by a remote instance of Device Manager, a manual refresh can be performed
at any time as described in “
Refreshing configuration information manually for each information
source ” on page 275, or it can be refreshed automatically.
Refresh operations for remote instances of Device Manager
The automatic refresh of configuration information for remote instances of Device Manager is controlled
by to two types of settings:
• Automatic updating in conjunction with storage systems refresh operations
• Periodic updating based on a specified refresh interval
Replication Manager allows you to use either one or both of the above settings to automatically refresh
configuration information associated with remote instances of Device Manager. In the initial settings
of Replication Manager, the automatic update setting is enabled and the periodic update setting is
disabled.
TIP:
The configuration might be updated often if both settings are enabled. Therefore HP recommends that
if you want to enable the periodic update setting, you disable the automatic update setting.
Automatic refreshing
When automatic refreshing of configuration information is enabled, Replication Manager regularly
checks whether remote Device Manager servers registered as information sources have refreshed
their storage systems configurations, then synchronizes the Device Manager and Replication Manager
databases.
You can enable or disable this automatic refresh by setting the
base.repositry.synchronize.polling
property in the
base.properties
file on the
management server. When this property is set to true , these two parameters go into effect:
• base.repositry.synchronize.interval : the monitoring interval at which regular checks
for storage refresh are performed.
• base.repositry.synchrocheck.interval : the interval at which a message is displayed
if configuration information is not synchronized.
For details on these properties, see the HP P9000 Replication Manager Software Configuration Guide.
TIP:
Replication Manager does not regularly check whether instances of HP StorageWorks P9000 for
Business Continuity Manager Software or P9000 mainframe agent registered as information sources
have refreshed their storage systems configurations. When a storage system managed exclusively by
HP StorageWorks P9000 for Business Continuity Manager Software is refreshed, the information is
provided by HP StorageWorks P9000 for Business Continuity Manager Software or P9000 mainframe
agent.
User Guide 271