HP XP P9000 Command View Advanced Edition Software - Manual (Page 315)

15 Managing storage systems
This chapter describes tasks for managing storage systems.
Managing V-VOLs
This module describes tasks for managing V-VOLs:
• Conditions for deleting V-VOLs , page 315
• Deleting V-VOLs , page 315
• Deleting multiple V-VOLs , page 315
Conditions for deleting V-VOLs
The following restrictions apply when deleting a V-VOL:
• The V-VOL must not be part of a pair configuration.
• The V-VOL must not have a path defined to any host.
Deleting V-VOLs
The following is required before deleting V-VOLs:
• The copy pairs of the V-VOLs must be deleted
• The LUNs of the V-VOLs must be deleted with Device Manager.
To delete V-VOLs:
1. On the V-VOLs tab, select the check boxes for the V-VOLs to be deleted.
2. Click Delete V-VOLs.
The Delete V-VOLs window is displayed.
3. Review the list of selected V-VOLs to be deleted and confirm the operation.
4. Click Confirm.
Deleting multiple V-VOLs
When there are multiple V-VOLs in a parity group on an XP24000/XP20000 storage system, CVS
is required to delete some of the V-VOLs in the group. If CVS has been uninstalled from the storage
system while multiple V-VOLs were created in a parity group, the delete operation will delete all of
the V-VOLs located in the same parity group.
User Guide 315