HP XP P9000 Command View Advanced Edition Software User Manual
Page 464
For open systems
In the Hosts view or Storage Systems view, volumes to which paths have been specified are displayed
in either the Paired or Unpaired list. The volumes constituting copy pairs are displayed in the Paired
list and the other volumes are displayed in the Unpaired list. However, the volumes constituting copy
pairs in simplex status are displayed in the Unpaired list, because they have been defined, but not
yet created.
In the pair configurations view, configuration definition information, including the information about
the copy pairs in simplex status, is displayed based on what is defined in the configuration definition
file. However, for Replication Manager to be able to manage existing copy pairs, the following
conditions must be satisfied:
•
A P9000 RAID Manager configuration definition file must be present.
If a copy pair is created using storage system operation management software (such as Remote
Web Console) and there is no configuration definition file, configuration definition information is
not displayed in the pair configurations view.
•
The P9000 RAID Manager configuration definition file must be stored in the following default
directory:
Windows: system-folder (the folder represented by the
%windir%
environment variable)
Systems other than Windows:
/
etc-directory
•
When more than one copy pair is set to a single volume (when a multi-target or cascade config-
uration is being used), each combination of a copy group name and copy pair name defined in
the configuration definition file must be unique.
•
The copy group name and copy pair name defined in the configuration definition file on a primary
volume must match the copy group name and copy pair name defined in the configuration defin-
ition file on the secondary volume.
•
When the pair management server is managing multiple copy pairs, every port number, copy
group name, and copy pair name combination defined in the configuration definition file must be
unique in the pair management server.
•
The settings specified in the configuration definition file must be within the ranges supported by
the Device Manager agent.
Depending on the version of Device Manager agent you are using, there are a number of limitations
that apply to the specification format and settings in the P9000 RAID Manager configuration definition
file. The range of specification formats (in the configuration definition file) that are supported by P9000
RAID Manager are the same as the range supported by Device Manager. For details about the
specification settings supported in configuration definition files, see the HP P9000 Command View
Advanced Edition Suite Software Administrator Guide.
To view an example configuration in which copy groups containing copy pairs in simplex status and
a configuration definition file exist, see “
Configuration in which copy groups containing copy pairs
in simplex status and a configuration definition file exist (open systems)
For mainframe systems
In the Hosts view or Storage Systems view, only the paired volumes (the volumes constituting copy
pairs) belonging to the host or storage system are displayed. However the volumes constituting copy
pairs in simplex status are not displayed, because they are nominal copy pairs and do not exist.
In the pair configurations view, configuration definition information, including the information about
the copy pairs in simplex status, is displayed based on the copy group definition file (prefix). However,
if a copy pair is created using storage system operation management software (such as Remote Web
Console) and there is no copy group definition file, the configuration definition information is not
displayed in the pair configurations view.
Exceptions
464