HP Deskjet F2140 All-in-One Printer - Manual (Page 52)

Refer to the following table to determine which paper type setting to choose based on the
paper loaded in the input tray.
Paper type Control panel setting
Copier paper or letterhead Plain
HP Bright White Paper Plain
HP Premium Plus Photo Paper, Glossy Photo
HP Premium Plus Photo Paper, Matte Photo
HP Premium Plus 4 x 6 inch Photo Paper Photo
HP Photo Paper Photo
HP Everyday Photo Paper Photo
HP Everyday Photo Paper, Semi Gloss Photo
Other photo paper Photo
HP Premium Paper Plain
HP All-in-One Paper Plain
HP Printing Paper Plain
Other inkjet paper Plain
Related topics
Control panel buttons
Change copy speed
Copies made from the control panel on regular, plain paper automatically use Normal
quality.
You can make a Fast copy using the instructions below. Fast copies faster with
comparable quality text, but the graphics quality might be lower. Fast copies use less ink
and extend the life of your print cartridges.
NOTE: Fast or Normal are not available when the paper type is set to Photo.
To make a Fast copy
1. Make sure you have paper loaded in the input tray.
2. Place your original print side down on the left front corner of the glass.
TIP: For quality copies, ensure that the scanner glass is clean and that there are
no foreign materials adhering to it. For more information, see Clean the glass .
3. Press and hold down the Scan button, and then press either Start Copy Black or
Start Copy Color.
Related topics
Control panel buttons
Chapter 8
50 Use the copy features
U
se th
e co
py f
eatu
res