Copy a two-page black-and-white document – HP Deskjet F2140 All-in-One Printer User Manual
Page 53
Copy a two-page black-and-white document
You can use the HP All-in-One to copy a single- or multiple-page document in color or
black and white. In this example, the HP All-in-One is used to copy a two-page black-
and-white original.
To copy a two-page document from the control panel
1.
Make sure you have paper loaded in the input tray.
2.
Place your original print side down on the left front corner of the glass.
3.
Press Start Copy Black.
4.
Remove the first page from the glass and load the second page.
5.
Press Start Copy Black.
Related topics
Make a 10 x 15 cm (4 x 6 inch) borderless copy of a photo
To make a borderless copy of a photo, use the 10 x 15 cm (4 x 6 inch) HP Premium Plus
Photo Paper with a tear-off tab. When you remove the tear-off tab, the output is a
borderless copy of the image that extends to the edges of the paper.
To make a borderless copy of a photo from the control panel
1.
Load 10 x 15 cm (4 x 6 inch) tabbed photo paper in the input tray.
NOTE:
To make a borderless copy, you must use tabbed photo paper.
2.
Load your original photo print side down on the left front corner of the glass.
3.
Press Photo Paper Type.
NOTE:
When Photo Paper Type is selected, the HP All-in-One defaults to
making a borderless copy with a 10 x 15 cm (4 x 6 inch) original.
4.
Press Start Copy Color.
The HP All-in-One makes a borderless copy of your original photo, as shown below.
Copy a two-page black-and-white document
51
Us
e the
copy
fea
tures