HP Deskjet F2140 All-in-One Printer - Manual (Page 70)

One came with a print cartridge protector, you can use an airtight plastic container to
protect your print cartridge.
The print cartridge protector is designed to keep a print cartridge secure and prevent it
from drying out when it is not being used. Whenever you remove a print cartridge from
the HP All-in-One with the intention of using it again later, store it in the print cartridge
protector. For example, store the black print cartridge in a print cartridge protector if you
are removing it so you can print high-quality photos with the photo and tri-color print
cartridges.
NOTE: Your printer might be packaged with only a tri-color print cartridge. For better
results, install a black print cartridge in addition to the tri-color print cartridge. You can
print without a black print cartridge but doing so can cause the printer to print more
slowly and printed colors to differ from those you would see if a black print cartridge
and a tri-color print cartridge were installed.
Some models of the HP All-in-One do not support photo print cartridges.
To order print cartridges, go to
www.hp.com . Choose your country/region, and then
click Buy or Online Shopping.
To insert a print cartridge into the print cartridge protector
▲ Place the print cartridge into the print cartridge protector at a slight angle and snap it
securely into place.
To remove the print cartridge from the print cartridge protector
▲ Press down on the top of the print cartridge protector to release the print cartridge,
then gently remove the print cartridge out of the print cartridge protector.
Align the print cartridges
The HP All-in-One prompts you to align cartridges every time you install or replace a print
cartridge. You can also align the print cartridges at any time from the control panel or by
Chapter 10
68 Maintain the HP All-in-One
Maintain
the HP All-in-One