The display shows the wrong language – HP Photosmart C8180 All-in-One Printer User Manual

Page 152

Advertising
background image

to turn on. If you press the On button again during this time, you might turn the device
off.

WARNING!

If the HP All-in-One still does not turn on, it might have a mechanical

failure. Unplug the HP All-in-One from the power outlet and contact HP. Go to:

www.hp.com/support

If prompted, choose your country/region, and then click Contact HP for
information on calling for technical support.

I connected the USB cable, but I am having problems using the HP All-in-One with
my computer

Cause: The USB cable was connected before the software was installed.
Connecting the USB cable before prompted can cause errors.
Solution: You must first install the software that came with the HP All-in-One before
connecting the USB cable. During installation, do not plug in the USB cable until
prompted by the onscreen instructions.
Once you have installed the software, connecting your computer to the HP All-in-One
with a USB cable is straightforward. Simply plug one end of the USB cable into the
back of your computer and the other into the back of the HP All-in-One. You can
connect to any USB port on the back of your computer.

For more information on installing the software and connecting the USB cable, see
the Setup Guide that came with the HP All-in-One.

The display shows the wrong language

Cause: You might have selected the incorrect language when setting up the HP All-
in-One.

Hardware setup troubleshooting

151

Trou

bles

ho

ot

ing

Advertising