HP Photosmart C8180 All-in-One Printer - Manual (Page 23)

There are two types of slideshows that you can enable:
• Store Demo: appears after the HP All-in-One is inactive for one minute and shows a
set of predefined graphics that describe features of the device. The slideshow plays
until you press a button or use the device. If the HP All-in-One remains inactive for
eight hours, the display turns off.
NOTE: HP recommends leaving Store Demo off.
• Tips Slideshow: appears only after you print from the computer. The HP All-in-One
shows a set of predefined slides with information about special features that you can
do with the device. The slideshow plays through once and then the display returns to
the main menu.
To turn the store demo on or off
1. Touch Setup on the display.
2. Touch Tools.
3. Touch to scroll through the options, and then touch Store Demo.
4. Touch On or Off to turn it on or off.
To turn tips slideshow on or off
1. Touch Setup on the display.
2. Touch Tools.
3. Touch to scroll through the options, and then touch Tips Slideshow.
4. Touch On or Off to turn it on or off.
Share CD/DVD drive
You can set up the HP All-in-One so that the LightScribe CD/DVD can be accessible and
operated by the HP All-in-One only, by your connected Windows computer only, or by
both the HP All-in-One and your Windows computer.
NOTE: The default setting is for the drive to be accessible and operated by both the
HP All-in-One and your connected Windows computer.
To enable CD/DVD drive sharing
1. Touch Setup on the display.
2. Touch Tools.
3. Touch Share CD/DVD Drive.
4. Do one of the following:
•
Touch Share to enable sharing of the drive by both the HP All-in-One and your
connected Windows computer (default setting).
• Touch Computer Only to make the drive accessible and operable by your
connected Windows computer only.
• Touch Device Only to make the drive accessible and operable by the HP All-in-
One only.
Chapter 4
22 Finish setting up the HP All-in-One
Finish set
up