HP OneView for VMware vCenter - Manual (Page 31)

Navigating HP Insight Management with the Server Module
Information from iLO, Onboard Administrator, HP SNMP agents, HP CIM providers, and Virtual
Connect Manager is compiled and displayed on the HP Insight Management page at both the
cluster level and the host level.
NOTE:
•
In the vSphere Web Client, information is displayed on the Monitor and Manage pages.
In order for iLO information to display, iLO must be associated with the VMware host. For more
information, see
“Associating the VMware host to iLO” (page 10) .
If you have a server module installed and a cluster is selected in the inventory tree, HP Insight
Management provides the following information:
•
Status/Health
•
Infrastructure
•
Software/Firmware
•
News Feed
•
Cluster
•
Tasks
If you have a server module installed and a host is selected in the inventory tree, HP Insight
Management provides the following information:
•
Status/Health
•
Overview
•
Host
•
Networking
•
Software/Firmware
•
Infrastructure
•
News Feed
•
Tasks
NOTE: For information about navigating HP Insight Management with the Storage Module for
vCenter, see “Navigating HP Insight Management with the Storage Module” (page 46) .
Depending on the context of the page, links are available to launch HP tools, as needed.
Changing Server Management properties
To change host properties, select a host from the inventory tree, and then access HP Insight
Management. Move the cursor over the Settings icon , and select Host Properties.
The Host Properties page opens and allows you to modify the properties of the selected host.
To change cluster properties, select a cluster from the inventory tree, and then access HP Insight
Management. Move the cursor over the Settings icon , and select Cluster Properties
The Cluster Properties page opens and allows you to modify the properties of the selected cluster.
When updating the properties information at the cluster level, information is updated for all servers
in the cluster. When updating the properties information at the host or server level, information is
updated for that host or server only.
Using the Server Module for vCenter 31