Viewing detailed storage information, Viewing storage volumes – HP OneView for VMware vCenter User Manual
Page 58
•
Used—Amount of storage used on the host as virtual disks (VMDKs or RDMs)
•
% Savings—Amount of storage saved through the use of VMware thin provisioning
Available HP StoreOnce Backup Systems
This section lists the HP StoreOnce Backup Systems available. For each HP StoreOnce Backup
System, move the cursor over the status bar to view storage information.
For each configured backup system, all the service sets are displayed. For each service set the
following information is displayed:
•
Used—The amount of data stored on the service set by the services on the service set.
•
Total—Total amount of storage on the service set.
•
Deduplication Ratio—The deduplication ratio of data stored on the service set.
Viewing detailed information
Click the Storage Volumes, Virtual Disks, HBAs, Paths, Replications, or VMs to Volumes tab to view
detailed information about the selected VM. For information about the values displayed in these
tabs, see the following:
•
“Viewing storage volumes” (page 58)
•
“Viewing virtual disks” (page 61)
•
•
•
“Viewing replications” (page 64)
•
“Viewing VMs to volumes” (page 65)
Viewing detailed storage information
When you view storage information in HP Insight Management, the Storage page includes another
row of tabs and a filter that you can use to view specific information about storage components,
such as:
•
Summary
•
Storage Volumes
•
Virtual Disks
•
HBAs
•
Paths
•
Replications
•
VMs to Volumes
Viewing storage volumes
The storage volumes page displays the following information:
•
Array Disk Name
HP StoreVirtual—Volume name
◦
◦
HP 3PAR StoreServ—Volume name
◦
HP EVA—Disk path on the storage system
◦
HP MSA 2000 G2/HP MSA P2000 G3—Volume name
58
Using Insight Control for vCenter