HP 3000 Enterprise Virtual Array - Manual (Page 190)

Description Message
Number Log message ID
Performed router firmware upgrade, new ver-
sion number is d.d.d.d.
290
FW Upgrade performed: new ver-
sion is: %d.%d.%d.%d
151842
User performed a router reboot or shutdown. 291
REBOOT/SHUTDOWN Command
from user. Code=%d
151843
FC port configuration has been modified. 337
#%d: qapisetfcinterface-
params_1_svc: FC port configuration
changed
151889
iSCSI port configuration has been modified. 338
#%d: qapisetiscsiinterface-
params_1_svc: iSCSI port configura-
tion changed
151890
iSNS configuration has been modified. 339
#%d: qapisetisns_1_svc:iSNS config-
uration changed
151891
NTP configuration has been modified. 340
qapisetntpparams_1_svc: NTP con-
figuration changed
151892
VLAN configuration has been modified. 341
#%d: qapisetvlanparams_1_svc:
VLAN configuration changed
151893
User presented a LUN to an initiator. 342
qapisetlunmask_1_svc: Lunmask ad-
ded for LUN %d
151894
User unpresented a LUN to an initiator 343
qapisetlunmask_1_svc: Lunmask re-
moved for LUN %d
151895
Management Ethernet port configuration has
been modified.
344
qapisetmgmintfcparams_1_svc:Man-
agement port configuration changed
151896
Router configuration has been modified. 345
qapisetbridgebasicinfo_1_svc:Bridge
configuration changed
151897
User enabled GE (iSCSI) port %d. 356
GE%d: Port status changed by user
to ENABLED.
151908
User disabled GE (iSCSI) port %d. 357
GE%d: Port status changed by user
to DISABLED.
158909
User enabled FC port %d. 358
FC%d: Port status changed by user
to ENABLED.
158910
User disabled FC port %d. 359
FC%d: Port status changed by user
to DISABLED
158911
Initiator configuration changed, such as CHAP
settings or OS type.
530
qapiaddmodifyinitiator_1_svc : Initi-
ator Configuration Changed
152082
User removed an initiator from the router.
Typically this is done using CLI "initiator rm"
command.
531
qapiremoveinitiator_1_svc : Initiator
Removed
152083
Log data 190