HP 3000 Enterprise Virtual Array - Manual (Page 210)

iii. Select the Enable CHAP check box.
iv. Enter a CHAP secret. For example:
CHAPsecret01
b. To enable CHAP for the mpx100/100b Discovered iSCSI Initiator entry using the
mpx100/100b CLI:
• If the iSCSI Initiator is not listed under the Show Initiators command:
i. Enter the initiator add command and add the iSCSI Initiator that is about to
do discovery.
ii. Enable CHAP and enter a CHAP secret. For example:
CHAPsecret01
• If the iSCSI Initiator is already listed under the Show Initiators command:
i. Enter the initiator mod command and select the iSCSI Initiator that is about to
do discovery.
ii. Enable CHAP and enter a CHAP secret. For example:
CHAPsecret01
2. Enable CHAP for the Microsoft iSCSI Initiator:
a. Click Discovery.
• For manually discovering iSCSI target portals:
i. Click Add under Target Portals.
ii. Enter the IP address of the iSCSI port of the mpx100/100b.
iii. Click Advanced.
iv. Select the CHAP Login Information check box.
v. Enter the CHAP secret for the mpx100/100b discovered iSCSI Initiator in the Target
Secret box. For example:
CHAPsecret01
See “ CHAP restrictions ” on page 208 for more information on CHAP.
vi. Click OK and the initiator completes Target discovery.
• Using iSNS for target discovery:
i. Click Add under iSNS Servers.
ii. Enter the IP address of the iSNS server.
iii. Click OK.
b. Click Targets.
c. Select the appropriate target for login.
d. Click Log On.
e. Click Advanced.
f. Select the CHAP Login Information check box.
g. Enter the CHAP secret for the mpx100/100b discovered iSCSI Initiator in the Target Secret
box.
h. Click OK.
i. Click OK and the initiator completes normal login.
Setting up authentication 210