HP StorageWorks 2.64 Director Switch - Manual (Page 200)

Information and Error Messages
200 High Availability Fabric Manager User Guide
Cannot modify a zone
with an invalid name.
Rename zone and try
again.
Zone does not have a
valid name.
Rename zone, then use
Modify Zone dialog box
to modify zone.
Cannot modify product. The selected product
cannot be modified.
Verify the HAFM
server-to-product link is
up.
If the link is up, the HAFM
server may be busy.
Another Product Manager
instance may be open.
The user may not have
permission to modify the
product.
Cannot perform
operation. Fabric is
unknown.
This message displays if
no switches in the fabric
are connected to the
HAFM server.
Ensure at least one
fabric-attached switch or
director has an Ethernet
connection to the HAFM
server and retry the
operation.
Cannot perform
operation. The list of
attached nodes is
unavailable.
This message displays
when attached nodes are
unavailable and the user
attempts to modify a zone
or create a new zone.
Verify an attached node
is available and retry the
operation.
Cannot retrieve current
SNMP configuration.
The current SNMP
configuration could not
be retrieved.
Try again. If the problem
persists, contact the next
level of support.
Cannot save SNMP
configuration.
The current SNMP
configuration could not
be saved.
Try again. If the problem
persists, contact the next
level of support.
Cannot set write
authorization without
defining a community
name.
An SNMP community
name has not been
configured.
Enter a valid community
name in the Configure
SNMP dialog box.
Cannot show zoning
library. No fabric exists.
You cannot show the
zoning library if no fabric
exists. You must have
identified a switch or
director to the HAFM for
a fabric to exist.
Identify an existing switch
or director to the HAFM
using the New Product
dialog box.
Table 9: High Availability Fabric Manager Messages (Continued)
Message Description Action