HP StorageWorks 2.64 Director Switch - Manual (Page 228)

Configuring Remote Workstations: Solaris Systems
228 High Availability Fabric Manager User Guide
9. Click Next.
The Choose Install Folder screen displays (similar to Figure 90 on
page 220).
10. Choose a folder on the remote workstation in which to store the HAFM
software. You can accept the default location, type in the path to a new
location, or click Choose to browse for an appropriate location. Click Restore
Default Location to change the location back to the default.
11. Click Next.
Note: If the HAFM is already installed on the system, you will be prompted to uninstall
the existing version of the HAFM. If you want to uninstall the existing software, click Yes
and press Next. In the Uninstall High Availability Fabric Manager window, click
Uninstall. When the uninstallation process is done, click Quit.
The Choose Shortcut Location screen displays.
12. Select a shortcut location. The options for the location of HAFM links are:
■ In your home folder—Adds a new program group on the Start menu for
the HAFM.
■ Other—Enables you to choose any location on your hard drive or
network for the HAFM files.
■ Don’t create links—Prevents the installation from creating a link for the
HAFM.
13. Click Next to begin the installation.
The Pre-Installation Summary screen displays (similar to Figure 92 on
page 222).
14. Review the installation information and click Install.
The progress of the installation is tracked on the Installing HP
StorageWorks HAFM screen
( similar to Figure 93 on page 222).
15. When complete, the screen shown in Figure 94 on page 223 displays. If
desired, enable the Start the High Availability Fabric Manager check box
to immediately open the HAFM. Click Done to close the Install Complete
dialog box.