HP StorageWorks 2.64 Director Switch - Manual (Page 207)

Information and Error Messages
207 High Availability Fabric Manager User Guide
No nickname selected. No nickname was
selected when the
command was attempted.
Choose a nickname and
try again.
No Product Managers
installed.
No director or switch
Product Manager
application is installed on
this workstation.
Install the appropriate
Product Manager to this
workstation.
No routing information
available.
No information is
available for the route
selected.
Choose a different route
and try the operation
again.
No user selected. No user was selected
when the command was
attempted.
Choose a user and try
again.
No zone member
selected.
A zoning operation was
attempted without a zone
member selected.
Choose a zone member
and try the operation
again.
No zone selected or zone
no longer exists.
A zoning operation was
attempted without a zone
selected, or the zone
selected no longer exists
in the fabric.
Choose a zone or use a
valid zone and try the
operation again.
No zone selected or zone
no longer exists.
A zoning operation was
attempted without a zone
selected, or the zone
selected no longer exists
in the fabric.
Choose a zone or use a
valid zone and try the
operation again.
No zone selected. A zoning operation was
attempted without a zone
selected.
Choose a zone and try
the operation again.
No zone set active. A zone set cannot be
deactivated if there are no
active zones.
Informational message
only - no action is
required.
No zone set selected or
zone set no longer exists.
A zoning operation was
attempted without a zone
set selected, or the zone
set you selected no longer
exists in the fabric.
Choose a zone set and try
the operation again.
No zone set selected. A zoning operation was
attempted without a zone
set selected.
Choose a zone set and try
the operation again.
Table 9: High Availability Fabric Manager Messages (Continued)
Message Description Action