HP StorageWorks 2.64 Director Switch - Manual (Page 85)

Using the Menu Bar
85 High Availability Fabric Manager User Guide
4. Click Send Test.
A message box displays indicating that the test was initiated ( Figure 39 ).
Figure 39: Results of Remote Notification Test
5. Click OK to close the message box.
Configure Ethernet Events
An Ethernet event occurs when the Ethernet link between the HAFM server and
the managed product is dropped. You can configure Ethernet events for all
managed products and set a specific time interval for an event to be generated
after the communication drops.
1. Choose Maintenance > Configure Ethernet Events.
The Configure Ethernet Events dialog box displays ( Figure 40 ).
Figure 40: Configure Ethernet Events dialog box
2. To enable Ethernet events, click the Enable ethernet events check box.
3. To change the default timeout of 30 minutes, enter a new value in the
Ethernet timeout field. The value must be between 10 and 120.
4. Click OK to accept and activate the data.
If e-mail notification is also enabled, an e-mail will be sent if the HAFM cannot
communicate with a product.
If call-home notification is also enabled, a call-home notification will be
generated if the HAFM cannot communicate with a product.