HP Command View EVA Software - Manual (Page 105)

Table 12 HP array software component IDs (continued)
Description ID
Fault Management 4
Fibre Channel Services 6
Container Services 7
RAID Services 8
Storage System Management Interface 9
System Services b
Data Replication Manager Component c
Disk Enclosure Environmental Monitoring Unit Services d
System Data Center e
Host Port 42
Metadata Utilities 80
Diagnostic Operations Generator 83
Diagnostic Runtime Services 84
Corrective action codes
You can view the complete list of corrective action codes when you select Corrective action code
in an event description.
Event information packet (EIP) types
Table 13 HP array event information packet (EIP) types
Description Title Code
A machine check occurred while a termination event
was being processed. Fault Manager Termination Processing Recursive
Entry Event 01
An unexpected event occurred while a termination
event was being processed. Fault Manager Termination Processing Unexpected 02
An event that affects Fault Manager operation
occurred. Fault Manager Management Event 03
An error was encountered while accessing a physical
disk drive. Fibre Channel Services Physical Disk Drive Error 04
The state of a Storage System Management Interface
entity was changed. Storage System Management Interface Entity State
Change 05
A controller detected a critical condition for a Disk
Enclosure Power Supply of the Storage System. Disk Enclosure power supply failure 06
Excessive link errors were detected on a Fibre
Channel port. Fibre Channel Services Fibre Channel Port Link Error 07
A Fibre Channel port link has failed or a Drive
Enclosure Environmental Monitoring Unit task has
failed. Fibre Channel Services Fibre Channel Port Link 08
An error was encountered while attempting to access
a physical disk drive or the mirror port. Fibre Channel Services Physical Disk Drive/Mirror
Port Error 09
A Storage System state change occurred. Storage System State Services State Change 0A
Event code types and descriptions 105