HP Command View EVA Software - Manual (Page 106)

Table 13 HP array event information packet (EIP) types (continued)
Description Title Code
A physical disk drive state change occurred. Storage System State Services Physical Disk Drive
State Change 0B
A Data Replication Manager state change occurred. Data Replication Manager State Change 0C
A change in system time occurred. Executive Services System Time Change 0D
A Storage System Management Interface entity was
created or deleted. Storage System Management Interface Entity
Creation or Deletion 0E
An attribute of a Storage System Management
Interface entity has changed. Storage System Management Interface Entity Attribute
Change 0F
A controller state change occurred. System Services HSV210 Controller State Change 10
Status of a disk enclosure element has changed. Disk Enclosure Environmental Monitoring Unit
Services Status Change 11
Unexpected work was received from a physical disk
drive or the mirror port. Fibre Channel Services Physical Disk Drive/Mirror
Port Unexpected Work Encountered 12
Summary of errors encountered while attempting to
access a physical disk drive, the mirror port, or a
Drive Enclosure Environmental Monitoring Unit. Fibre Channel Services Physical Disk Drive/Mirror
Port/Drive Enclosure Environmental Monitoring Unit
Error Summary 13
A failure was detected during the execution of a
diagnostic. Diagnostic Operations Generator Detected Failure 14
An operation on a Disk Group has started or
completed. Container Services Management Operation has
started or completed 15
An HSV210 controller has received a time report
message. Data Replication Manager Time Report 16
A new device map has been generated on a Fibre
Channel port. Fibre Channel Services Fibre Channel Port Loop
Config 17
A Redundant Storage Set state change occurred. Storage System State Services Redundant Storage
Set State Change 18
Status of a System Data Center element has changed. System Data Center Services Status Change 19
A code load operation has occurred. System Services Code Load Operation Update 1A
An HSV210 controller operation was terminated due
to an unrecoverable event detected by either software Fault Manager Termination Event 1C
or hardware or due to an action initiated via the
Storage System Management Interface.
An HSV210 controller operation was terminated due
to an unrecoverable event detected by either software Fault Manager Termination Event (old Termination
Event Information Header) 1D
or hardware or due to an action initiated via the
Storage System Management Interface.
General Storage System state information to be
reported. General Storage System State Services State
Information Event 1E
Coupled crash control codes
Table 14 HP array coupled crash control codes
Description Code
Other controller should not perform a coupled crash. 0
Other controller should perform a coupled crash. 1
106 HP array event code formats and descriptions