Commands – HP Command View EVA Software User Manual
Page 87
6.
(Optional:) In the TLViz title box, enter a title for the TLViz-formatted files that will be generated.
The formatting of the evaperf vd and evaperf pd output can be disabled by selecting
either or both of the check boxes, Disable TLVIZ-VD Output and Disable TLVIZ-PD Output. If
one or both of these options are checked, the corresponding TLVIZ files will not be generated.
7.
Select Build TLViz files to format the data.
This generates TLViz-formatted output files using the data from the command output file. The
output file names begin with TLViz-.
After generating the TLViz-formatted files from evaperf all, xall, or nall output, you can
build the Microsoft Access database EVADATA.MDB:
1.
Click Browse and select the evaperf all, xall, or nall command output file.
2.
Select Build Access Database.
3.
Open the EVADATA.MDB file to view the database tables.
HP TLViz has limited space to display names (30 characters maximum). Included with the
TLViz-formatted files are map files (PDISK-MAP.txt and VDISK-MAP.txt) that map the
virtual disk and physical disk names displayed in HP TLViz to the LUN and enclosure/bay
names displayed in the HP P6000 Performance Data Collector output.
Commands
This section describes the commands you can use in the command line interface to gather
performance metrics. The general syntax for commands is:
evaperf <command> [modifiers]
You can specify the command modifiers in any order.
describes the available HP P6000 Performance Data Collector commands. The
commands are listed alphabetically.
Table 6 HP P6000 Performance Data Collector commands
Description
Command
Displays a summary of the storage system status by running the following commands
together: ls, as, cs, vd, vdg,hc, ps, hps, pd, pdg, drg, drt, xcopy, wsame, and
unmap
.
all
Displays array status.
as
Displays controller status.
cs
Configures HP P6000 Command View login parameters to be used for state data
collection.
cvconfig <server port
username>
Displays the disk group configuration for the storage systems managed by that host.
dginfo
Displays data replication groups for HSV300, HSV400, and HSV450. The drg data
is displayed only from firmware version 9xxxxxx and later.
drg
Displays data replication tunnel statistics.
drt
Deletes the password for the specified storage system from the host's Windows registry.
The password is not deleted on the storage system.
dpw wwn
Manages friendly name hosts as follows:
fnh
•
Displays a list of known hosts running HP P6000 Command View.
•
Adds a host to the friendly name host list.
Using the command line interface
87